MX-Bed Sample content
Shaped adsorbent for fixed beds
MOF-74 formed into pellets that pack a column without choking the gas flow.
- Base material
- MOF-74 (Mg / Co)
- Form
- Pellets
- Status
- In development
Overview
What it is.
Powder is right for the lab, but a capture column needs a shaped adsorbent: pellets that pack evenly, keep the pressure drop low and survive repeated heating.
MX-Bed is that form, and it is the material we validate in fixed-bed columns, so what you test is what goes into the bed.
Benefits
Why choose it.
Made for columns
Packs evenly, for a predictable adsorption front.
Low pressure drop
Pellet size chosen to keep gas moving through the bed.
Thermal cycling
Formulated for repeated capture and regeneration.
Specifications
Technical data.
Values marked Target are development goals. Values marked Sample are placeholders until measured data is published.
| Property | Value | Type |
|---|---|---|
| Base material | MOF-74 (Mg / Co) | |
| Form | Pellets | |
| Pellet diameter | 1–3 mm | Sample |
| Bulk density | To be determined | Sample |
| Regeneration temperature | ≤ 120 °C | Target |
| Cyclic stability | > 90 % | Target |
| Pack sizes | 100 g, larger on request | Planned |
Pack sizes
Test first, then scale.
Planned batch sizes for each step of a project.
- 1 gLaboratoryA first evaluation in your own lab.Planned
- 10 gFixed-bed validationColumn tests under your conditions.Planned
- 100 gField testsPilot and on-site trials.Planned
Applications
Where it fits.
- Fixed-bed CO₂ capture units
- Pilot and demonstration plants
- Temperature swing adsorption (TSA)
Documents
Downloads.
- Technical data sheet (TDS)Coming soon
- Safety data sheet (SDS)Coming soon
- Application noteComing soon
Working on a capture or separation problem?
Send us your stream and process conditions. We will tell you plainly whether our materials fit, and what a first test would involve.
Start a conversation